Use cleaned, polished, passivated and ready-to-use Thermo Scientific™ 316 Stainless Steel Capillary Tubing for HPLC. Flexible Kapillare 1/32'OD x 0.007'ID

Easy to install for quick column changeovers SWAP-IT TRANSFER LINE NUT THERMOVE=1 Stück

Thermo Scientific™ Mini Capillary Unions are for use with capillary GC columns. MINI CAP UNION KIT FOR 0.32 ID

Ferrule Kontes flangeless ETFE 1.8mm od tubing

Ensure reliable connections for Thermo Scientific™ GC instruments with these Thermo Scientific™ Ferrules. X10 FERRULE FOR GC/MS INTERFACE15% graphite /85% vespel 0.53mm for Agilent 5890,

Replaceable 0.2μm filter cartridges protect columns against particles, enhancing column lifetime X5 1.0 MM ID REPLACEMENT FILTER

Use these sample loops for your Thermo Scientific™ Rheodyne™ HPLC sample injectors.  PEEK CAPIL TUB 1/16 X 0.005 30CM

Select from a range of quality baseplates/manifolds for your Thermo Scientific™ Super Clean™ Cartridge Filters.

Minimize downtime with these easily replaceable filter system components. REPLACEMENT FILTER 0.5µ 4.6/4.0MM

SAMPLE DIFFUSION DISC (1CM)

Configure the Thermo Scientific™ Reacti-Therm™ Module with interchangeable aluminum blocks with a variety of hole configurations for vials and tubes.

Use Thermo Scientific™ General Gas Chromatography Tubing and Tools to maintain and optimize your GC instrument. PICK-UP TOOL

Ensure reliable connections for Agilent™ GC instruments with these Thermo Scientific™ Ferrules for Agilent Instruments. X10 Ferrule Thermo Scientific for injectors and

Improve gas quality and optimize GC analysis with easy-to-use Thermo Scientific™ Super Clean™ Gas Cartridge Filters.

Probe adaptor and carrying case for use with the Thermo Scientific™ GLD Pro Gas Leak Detector. CARRY CASE SOFT SIDE FOR GLDpro leak detector (HCA-239-280Y)

Use cleaned, polished and passivated Thermo Scientific™ 316 Stainless Steel Capillary Tubing for HPLC, ready for immediate use. SS CAPILLARY TUBING 1/16''OD,0.020''ID, 5 FOOT

Use low bleed, robust BTO Septa for demanding GC-MS applications. X50 Septa Thermo Scientific GC low bleed silicone

Maintain the performance of your GC instrument with Thermo Scientific GC Tool Kits. GC TOOL KIT FOR GENERAL GCapplications

Thermo Scientific™ Brass Nuts for 15% Graphite/85% Vespel Ferrules are mechanically robust for a long lifetime and are compatible with GC/MS. X2 Nut Thermo Scientific brass 15% graphite / 85%Stück

Perform derivatization and other small-scale reactions reliably and with ease.

Eliminate the requirement for extra fittings with Thermo Scientific™ Uniguard Direct-Connection Guard Cartridge Holders. CARTRIDGE HOLDER HYPERSIL DROP-IN DIRECT CONNECTfits 4.0mm and 4.6mm ID Hypersil columns 10mm

Ensure HPLC quality and robustness with Thermo Scientific™ PEEK Fingertight Fittings. X10 Fitting Thermo Scientific LC tubing fingertigh

For use with HPLC columns with I.D. ranging from 1.0 to 4.0mm STAND-ALONE GUARD CARTRIDGE HOLDER

Use these thermometers to measure temperature in dry block heaters of Thermo Scientific™ Reacti-Therm™ Heating and Stirring module.

Filter aggressive chemicals, including acids and non-aqueous solvents such as those used in GC and HPLC with this in-line syringe filter with PTFE membrane. X10 Syringe/inline filter for air venting non

Eliminate leaks with the Thermo Scientific™ SilTite Ferrule. X10 Ferrule Thermo Scientific SilTite replacement

A wide range to cover most applications X10 Septa Thermo Scientific leak free seal to fit

X48 BTO SEPTA 12.7MM DIAMETER IN BLISTERS

Protect HPLC systems with one-piece Thermo Scientific™ Javelin Direct-Connection Column Filters.

Make column changeovers quick and easy. Use this GC-MS interface system to switch capillary columns without the need to vent your mass spectrometer (MS).