0.2 mL individual tubes with attached flat or dome snap shut caps, available in a variety of colors X1000 PCR TUBE 0,2ML DOMED GREEN(VE=1000Stck.)

Tight seal minimizes evaporation and contamination X300 MICROAMP OPTICAL 8-CAP STRIP STORE AT ROOMtemperature

Autoclavable X500 RNASE-FREE MICROFUGE TUBES (1.5ML) STORE ATroom temperature

With integral “snap shut” cap X1000 PCR tube 0.2ml, domed cap, PP, greenFB0337/G

Ideal for use in 0.2mL, 96-well V-bottom thermal cyclers X250 PCR tube 0.2ml, no cap, PP, green -FB-0264/G

With integral “snap shut” cap X1000 PCR tube 0.5ml, flat cap, PP, greenFB-0350G

Tolerate wide temperature range X250 NON-STICK RNASE-FREE MICROFUGE TUBES (2.0ML)Store at room temperature

Tubes precisely fit industry standard well spacing 125 Strips 200UL MICROAMP 8-TUBE STRIP,0.2ML STOREat room temperature

Optimize PCR and qPCR with these 0.2 mL strip tubes, available as 8 tubes per strip in several colors or 12 tubes per strip. X250 STRIP 8X0,2ML FLAT CAPS NEUT (MP 52 PROMO)

Maximized thermal conductivity reduces PCR amplification times X125 MICROAMP FAST 8-TUBE STRIP, 0.1ML STORE ATroom temperature

Maximized thermal conductivity X1000 MICROAMP OPTICAL 8-TUBE STRIP, 0.2ML 1000TUBes Store at room temperature

Minimize sample loss with the “snap shut” lids on these individual 0.5mL tubes for PCR applications. X1000 PCR TUBE 0,5ML FLAT PURPLE(VE=1000Stck.)

Thin and consistent wall thickness for precise thermal transfer X1000 0,5ML PCR & FLAT CAP ORANGE

Designed to fit standard 96-well blocks. Axygen™ PCR Tubes with Flat Cap, 0.2m are constructed of non-sterile polypropylene. Each conical tube features thin and consistent wall thickness. Tight-fitting cap secures contents and prevents evaporation. Available in an assortment of colors. X10000 PCR TUBE AXYGEN THIN WALL, WITH FLAT CAP,spectrum pack,polypropylene assorted colours0.2mL

Designed to maximize sample recovery BULKPACK MICROAMP RXN TUBES

Seal microtiter tubes tightly for storage with these polyethylene plug strips for use with 1.2mL MCT Titertube Racks.

Designed to fit on MicroAmp reaction tubes, tube strips, and 96-well plates X8 MICROAMP, 8-CAP STRIP

Manufactured from virgin polypropylene. BrandTech™ BIO-CERT™ RNase, DNase, DNA-Free Microcentrifuge Tubes are highly translucent and free from flash, air bubbles, and streaks. Fit most common rotors and may be spun up to 30,000 RCF. Flat snap caps form a tight, leak-free, easy-open seal with consistent thickness for trouble-free piercing. X450 Microcentrifuge tube PP IVD1,5ml lid sterileBIO-CERT

Tolerate wide temperature range X500 RNASE-FREE MICROFUGE TUBES (2.0ML) STORE ATroom temperature

Efficiently perform applications with these PCR tubes and plates, molded from 100% virgin polypropylene. X1000 tube,.5ml pcr w/flat cap green

Ensure efficient heat transfer to the sample with these tubes, thanks to their thin, even wall thickness and smooth wall surface. Eppendorf™ PCR Tubes are easy to open, but provide tight sealing to prevent evaporation in PCR. X500 Tubes PCR thin-walled 0.5mL (pack of 500)

Secure seal, autoclaveable X125 8-STRIP PCR TUBES, CAPS, RNASE-FREE, 0.2MLStore at room temperature

Withstands wide temperature range X1000 RNASE-FREE MICROFUGE TUBES (0.5ML) STORE ATroom temperature

Reduce PCR reaction time to as little as 25 minutes X1000 MICROAMP FAST REACTION TUBE WITH CAP, 0.1MLStore at room temperature

Available in a variety of colors for easy sample identification. Axygen™ 8-Strip PCR Tubes, 0.2mL are constructed of sturdy polypropylene. Each non-sterile, conical tube features thin and consistent wall thickness. Sold with flat or domed caps to prevent sample loss or without caps. X1250 PCR strip tube Axygen thin wall, 8 per

Nonstick, low-binding surface X500 NON-STICK RNASE-FREE MICROFUGE TUBES (0.5ML)Store at room temperature

Manufactured without lubricants or chemical additives that can contaminate reagents and samples. BrandTech™ Thin Wall 0.2mL PCR Tubes with Attached Caps are autoclavable and RNase-, DNase-, and DNA-free. Thin, uniform walls ensure consistent, precise thermal transfer. Attached flat caps form a tight seal to help prevent sample evaporation but open easily. Compatible with most thermal cyclers. X1000 PCR-tube, individual, with cap 0,2ml, rose,attached flat cap

Fits most common rotors and may be spun up to 30,000 RCF. BrandTech™ BRAND™ Non-Sterile Microcentrifuge Tubes are highly translucent and free from flash, air bubbles, and streaks. Polypropylene flat snap caps form a tight, leak-free, easy-open seal. Tubes have a uniform wall thickness for consistent, repeatable results. x1000 Microcentrifuge tube 1.5ml with lid lockingw. lid locking

Low profile strip tubes for PCR and qPCR applications. X80 STRIP 12X0,2ML LP NEUTRAL

Easy label cap 0.2 ML FROSTED LID PCR TUBES2 ml), 1000 tubes