Chemical Resistant Gloves
Chemical Resistant Gloves
Gloves designed to resist a wide range of chemicals; available in butyl, neoprene, nitrile, PVC, natural rubber, fluoroelastomer, and specialty formulations, lined/unlined, smooth/textured finish; ambidextrous, available in variety of sizes and thicknesses. Regulatory compliance details can be obtained at the individual product level.
The U.S. Occupational Health and Safety Administration (OSHA) standards for personal protective equipment (PPE) address the need for chemical protective safety gloves. PPE is required when hands are exposed to possible skin absorption of harmful substances or chemical or thermal burns.
The OSHA standard also mandates an assessment of chemical exposure and the choice of appropriate gloves based on:
- Dexterity demands
- Length of exposure
- Chemical concentration, temperature, and combinations
- Simultaneous hazards
What Are Chemical Resistant Gloves Used for?
Use chemical resistant gloves for work in chemical plants, transportation, chemical processing, petrochemical and oil refining, de-greasing, solvents, hazardous liquids, and janitorial and maintenance work.
Chemical resistant glove materials and possible applications include:
- Butyl ‒ high-permeation resistance to gas and water vapors; use with esters and ketones
- Neoprene ‒ excellent tensile strength and heat resistance; compatible with some acids and caustics; moderate abrasion resistance
- Nitrile ‒ chemical and abrasion resistance; for general-duty gloves; protects against oils, greases, petroleum products, some acids, and caustics
- PVC (polyvinyl chloride) ‒ resists most acids, fats, petroleum hydrocarbons; abrasion resistant
- PVA™ material (polyvinyl alcohol) ‒ water-soluble; gas-impermeable; resists aromatic and chlorinated solvents
- Viton™ material ‒ resists chlorinated and aromatic solvents; flexible; minimally resists cuts or abrasions
What Are the Best Chemical Resistant Gloves?
No single glove meets the PPE needs for all chemical exposures. Use the manufacturer’s test results to help select the right gloves and check ratings.
Some chemical resistant gloves come lined with cotton for comfort and have other special features. In addition to hand protection, eye protection is important as well. Make sure your facility is equipped with chemical splash goggles, faceshields, eye protection safety signage, and other PPE.
- (38)
- (27)
- (1)
- (3)
- (4)
- (1)
- (25)
- (36)
- (1)
- (36)
- (9)
- (5)
- (7)
- (6)
- (4)
- (36)
- (57)
- (33)
- (40)
- (6)
- (12)
- (4)
- (4)
- (1)
- (1)
- (5)
- (3)
- (1)
- (6)
- (6)
- (5)
- (20)
- (3)
- (66)
- (1)
- (8)
- (30)
- (2)
- (3)
- (28)
- (68)
- (6)
- (5)
- (4)
- (2)
- (13)
- (5)
- (4)
- (2)
- (3)
- (4)
- (3)
- (10)
- (4)
- (1)
- (4)
- (10)
- (4)
- (1)
- (1)
- (5)
Filtered Search Results
ANSELL™ Supported Natural Rubber AlphaTec™ Gloves
Nylon liner with high dexterity and flexibility. Offers heat, chemical and mechanical protection.
Chlorinated | No |
---|---|
Grip Design | Smooth Finish |
Length (Metric) | 300 mm |
EN 421 | No |
Applications | Industrial |
EN388 Standard | 3131A |
Color | Blue |
Length (English) | 11.8 in. |
EN ISO 374-1 | Type A |
Certifications/Compliance (Europe) | CE 0493|EN 388:2016 +A1:2018|EN407:2020 |EN ISO 21420:2020|EN ISO 374-1:2016|EN ISO 374-5:2016|Food Type: Rubber|Category III|REACH Compliant |
EN ISO 374-1 CHEMICAL LETTER CODES | AKLMPT |
EN ISO 374 - 5 | Bacteria, Fungi only |
Latex Free | No |
Lining | Lined |
Liner Material | Nylon |
Glove Cuff Style | Pinked |
Ansell™ Scorpio™ 8-352 Series Green Neoprene Immersion Gloves
Neoprene dipped coating on interlock knit liner for better grip on wet and slippery materials.
Laboratory/Cleanroom Use | Yes |
---|---|
Series | 8-352 |
Product Type | Immersion Gloves |
Coating Material | Neoprene |
Back Material | Neoprene |
Palm Type | Fully coated-palm |
Quantity | 72 Pairs |
Style | 8-352 |
Resistant To | Chemicals |
Lining | Interlock Knit Cotton |
Certifications/Compliance | ANSI, EN 388 : 3121, EN 374 |
Cuff Material | Neoprene |
Glove Cuff Style | Gauntlet |
Ansell AlphaTec™ 02-100 Chemical Resistant, 5 Layer Laminated Gloves
Laminated gloves provide extreme resistance against a wide range of chemicals, including biological hazards.
Thickness (Metric) | 0.06 mm |
---|---|
Series | AlphaTec™ 02-100 |
Grip Design | Smooth |
EN ISO 374-1 | Type A |
Certifications/Compliance (Europe) | CE 0493, EN420:2003 + A1:2009; Category lll |
EN ISO 374-1 CHEMICAL LETTER CODES | ABCEFGHIMS |
Length (Metric) | 38 cm |
EN ISO 374 - 5 | Bacteria, Fungi WITH Virus Protection |
EN388 Standard | EN 388:0000 |
Thickness (English) | 2.5 mil |
Length (English) | 15 in. |
Lining | Unlined |
Material | Laminated Film |
Ansell™ AlphaTec™ 58-530W Series Nitrile Immersion Gloves
Recommended for indoor applications. Enables users to handle wet or oily objects with less grip force and more control. The patented Ansell Grip TechnologyTM ensures that the coating polymer does not penetrate the liner during manufacture to prevent the likelihood of chemical leakage onto the skin.
Series | 58-530W |
---|---|
Product Type | Immersion Gloves |
Coating Material | Nitrile |
Back Material | Nitrile |
Quantity | 6 Pairs |
Style | 58-530W |
Resistant To | Chemical resistance |
Lining | White Nylon |
Liner Material | Nylon |
Cuff Material | Nitrile |
Glove Cuff Style | Gauntlet |
Ansell AlphaTec™ 58-430 Chemical Safety Gloves
Flock-lined chemical safety gloves offer the dexterity of an unlined style with wet and oily grip performance. Ideal for incidental exposure to lubricants and cleaning agents in industrial settings.
Chlorinated | No |
---|---|
Grip Design | ANSELL GRIP™ Technology |
Length (Metric) | 32 cm |
EN388 Standard | EN 388:3001X, EN 388:3001 |
Color | Green,Anthracite |
Length (English) | 12.5 in. |
Material | Nitrile |
For Use With (Application) | Chemical handling, Handling paints, inks, dyes, glues and adhesives, Industrial tool maintenance, Rubber and rubber additives, Handling fluid-coated metal parts, Handling waste oils, Petrochemicals, Waste and water treatment |
Thickness (Metric) | 0.30 mm |
Series | AlphaTec™ 58-430 |
EN ISO 374-1 | Type A |
ANSI Abrasion Rating | ANSI 5 |
Certifications/Compliance (Europe) | EN 420:2003 + A1:2009, Category III, EN 1149 |
EN ISO 374-1 CHEMICAL LETTER CODES | JKLOPT |
EN ISO 374 - 5 | Bacteria, Fungi only |
Thickness (English) | 12 mil |
Latex Free | Yes |
Lining | Lined |
Certifications/Compliance | 21 CFR 170-199 |
Liner Material | Cotton Flock |
Glove Cuff Style | Gauntlet |
Ansell AlphaTec™ 23-200 Food Safe PVC-Coated Cotton-Lined Gloves
Medium duty gloves maintain dexterity and pliability, even at low temperatures. Textured finish enhances grip capabilities in wet, slippery applications.
Length (Metric) | 300 mm |
---|---|
EN388 Standard | 3121B |
Color | Blue |
Length (English) | 12 in. |
Cut Resistance Rating | ANSI A2 |
Material | PVC |
Series | 23-200 |
EN ISO 374-1 | Type B |
ANSI Abrasion Rating | ANSI 4 |
Certifications/Compliance (Europe) | EN 420:2003 + A1:2009, EN 374_2003 Microorganism, REACH Compliant |
EN ISO 374-1 CHEMICAL LETTER CODES | KLT |
EN ISO 374 - 5 | Yes |
Lining | Lined |
Exterior Finish | Fully Textured |
Liner Material | Cotton |
Glove Cuff Style | Gauntlet |
Uvex™ Rubiflex NB27 Safety Gloves
Gloves feature a special NBR coating and full cotton interlock liner for a secure grip in damp, oily, or greasy work environments.
Series | Rubiflex NB27 |
---|---|
Length (Metric) | 27 cm |
Coating Material | NBR |
EN388 Standard | 3111X |
Color | Orange |
Gender | Unisex |
Certifications/Compliance | OEKO-TEX™ Standard 100 |
Liner Material | Cotton |
For Use With (Application) | Inspection, Maintenance, Metal Processing, Painting, and Repairs |
Glove Cuff Style | Gauntlet |
Uvex™ Rubiflex NB60SZ Chemical Protection Gloves
Full NBR-coating reinforced with cotton interlock supporting material for applications that require protection against chemicals and mechanical risks. Elastic on the glove cuff provides additional protection by preventing hazards from entering the glove.
Series | Rubiflex NB60SZ |
---|---|
EN ISO 374-1 | Type B |
EN ISO 374-1 CHEMICAL LETTER CODES | JKOPT |
Length (Metric) | 60 cm |
Applications | Laboratory |
Coating Material | NBR |
EN388 Standard | 2121X |
Color | Green |
Gender | Unisex |
Liner Material | Cotton |
For Use With (Application) | Chemical Handling, Drainage Construction, and Municipal Cleaning |
Cuff Material | Elastic |
Glove Cuff Style | Gauntlet |
Ansell™ AlphaTec™ 58-128
Enhanced Dexterity with Light Duty Chemical Protection and ANSELL GRIP Technology™
Finger Style | Full finger |
---|---|
Description | Enhanced Dexterity with Light Duty Chemical Protection and ANSELL GRIP Technology™ |
Resistant To | JKOPST |
Powdered | Powder Free |
For Use With (Application) | Chemical & Liquid Protection |
Cuff Material | Nitrile |
Glove Cuff Color | green |
Classification | Category III |
Style | 58-128 |
Exterior Finish | Sandpatch |
Cut Style | Index |
Certifications/Compliance | EN ISO 374-1:2016/Type A/JKOPST,EN ISO 374-5:2016/Virus,EN388:2016/X121A |
Liner Material | Nylon |
Glove Cuff Style | Straight |
Disposable | Reusable |
Packaging Type | Polybag/cardboard box |
Coating Material | Nitrile |
Color | Gray,Green |
Cut Resistance Rating | 1.5 |
Quantity | 12 pair/bag, 144 pair/carton |
Grade | Industrial grade |
Coated Area | Bonding |
Sterility | Non-sterile |
Hand | Specific |
Thickness (Metric) | 0.175 mm |
Series | AlphaTec™ series |
Back Material | Nitrile |
Model | 58-128 |
Latex Free | Yes |
Lining | Bonding |
DuPont™ Tychem™ PV350
Extremely durable, cotton-lined PVC construction with rough grip. Suitable for defensive protection from chemicals, oils and greases.
Ansell™ AlphaTec™ 58-530B Series Nitrile Immersion Gloves
Enables users to handle wet or oily objects with less grip force and more control. The patented Ansell Grip TechnologyTM ensures that the coating polymer does not penetrate the liner during manufacture significantly reducing the likelihood of chemical leakage onto the skin.
Glove Cuff Style | Gauntlet |
---|
Ansell™ Scorpio™ 19-024 Series Black Neoprene Immersion Gloves
Combine the flexibility and chemical resistance of neoprene with the comfort and heat resistance of a soft thermal liner. Provides protection from intermittent contact with hot surfaces up to 180°C.
Series | 19-024 |
---|---|
Glove Cuff Style | Gauntlet |
Ansell™ Duzmor™ Plus 87-600 Series Natural Rubber Latex Immersion Gloves
A unique combination of strength and elasticity for safer handling of more hazardous substances. Only 0.43 mm thick for outstanding sensitivity and tactile performance.Reduced risk of allergic reactions.
Laboratory/Cleanroom Use | Yes |
---|---|
Coating Material | Natural Rubber Latex |
Quantity | 12 Pairs |
Resistant To | Hazardous substances |
Cuff Material | Natural Rubber Latex |
Glove Cuff Color | Natural |
Thickness (Metric) | 0.43 mm |
Series | 87-600 |
Product Type | Immersion Gloves |
Back Material | Rubber Latex |
Style | 87-600 |
Latex Free | No |
Liner Material | Unflocked |
Glove Cuff Style | Pinked |
Uvex™ Rubiflex NB 3501 Safety Gloves
Lightweight NBR-coated gloves are highly flexible, and feature breathable RUBIPOR impregnation with a cotton interlock liner.
Series | Rubiflex NB 3501 |
---|---|
Length (Metric) | 35 cm |
Applications | Industrial |
Coating Material | NBR |
EN388 Standard | 0121X |
Color | Orange |
Gender | Unisex |
Liner Material | Cotton |
For Use With (Application) | Inspection, Light Metal Work, Maintanence, and Painting |
Glove Cuff Style | Gauntlet |
SHOWA™ Blue Nitrile Chemical Resitant Gloves, Model CS711
Foamed nitrile palm coating with enhanaced grip and seamless liner and offering forearm protection.
Chlorinated | Yes |
---|---|
Length (Metric) | 350 mm |
EN 421 | No |
EN388 Standard | EN388:4122A |
Finger Thickness (English) | 57.8 mil |
Color | Blue |
Length (English) | 13.77 in. |
Material | Nitrile,Polyester |
Finger Thickness (Metric) | 1.47 mm |
Thickness (Metric) | 1.47 mm |
EN ISO 374-1 | Type A |
EN ISO 374-1 CHEMICAL LETTER CODES | AJKLMNOPT |
EN ISO 374 - 5 | Bacteria, Fungi only |
Thickness (English) | 57.8 mil |
Palm Thickness (English) | 57.8 mil |
Latex Free | Yes |
Lining | Lined |
Glove Cuff Style | Gauntlet |
Palm Thickness (Metric) | 1.47 mm |