Range of manual and automated valves to meet variety of performance requirements.

AKTA start is an easy-to-use chromatography system that automates manual purification procedures using for example HiTrap columns.

Used for small samples.  Cytiva INV-907 ETFE Titanium Fill Port is designed for biocompatibillity.

Results in lower mass discrimination

2-way, 3-way Hex, 3-way single key (T), and large-to-small universal connectors with valves

Used to secure containers. Cytiva Polypropylene Screw lid GL45 Kit comes with screw lid and cap membrane.

Use as filter holder for buffer inlet tubes.   Cytiva Lifescience™ Inlet filter holder kit is an important chromatography accessory.

Protect your HPLC system with Thermo Scientific™ Bottom-of-the-Bottle™ Solvent Filters.

Used as a round fraction collector. Cytiva Frac30 Model Fraction Collector allows you to collect up to 30 fractions.

Use the gold-standard LinerGOLD™ GC Liners for consistently high accuracy, sensitivity, and precision in your gas chromatography (GC) analysis.

For use with the Fraction collector F9-C and the ÄKTA avant chromatography system. Cytiva Cassettes are available for Deep-Well Plates or 3mL Tubes for large-scale processing of samples in chromatography applications. Pack of 2.

Provides flow rates up to 5mL/min. Cytiva Peristaltic Pump is a single-channel peristaltic pump that consists of a four-roller pump head that delivers accurate, low pulsation flow rates. For use in ÄTKA™ chromatography systems, e.g. ÄKA Start.

Resists organic solvents and salt buffers commonly used in chromatography of biomolecules. Cytiva Life Sciences™ PEEK Sample Loops are an important accessory for chromatography applications.

Higher flow rates at lower back pressure. Cytiva ÄKTA™ High Flow Kit contains the necessary components and software to reduce backpressure in the system, thereby allowing higher flow rates.

Filters for buffer inlets as used with Inlet filter holder kit. Cytiva Inlet Filter Kit is a set of 5 polypropylene filters with 5 support screens.

Use these injection port liners to optimize performance of Agilent GC instruments.

Replacement part for Superloop™ assemblies. Cytiva Superloop™ Glass Tubes are graduated borosilicate tubes with thread and groove for use in either 10mL or 50mL Superloops.

Robust reproducible gradients that are applicable to a wide range of MAbs and ready to use with existing LC columns and systems, without the need to formulate mobile phases.

Set of 5 loops for loading/injecting samples onto a chromatography column. Cytiva Sample Loop Kit is a set of small PTFE loops (25, 50, 100, 200, 500μL capacities) for use with autosampler/injections valves (e.g. Valve V-7) and ÄKTA™ Chromatography Systems.

Used with classic ÄKTA systems.  Cytiva Online Filter Holder is fitted between the mixer and the injection valve.

Used as accessory for UV monitoring in chromatagraphic systems. Cytiva Hg Lamp and Housing includes lamp and aperture.

For various GC Instruments

Fitted FEP tubing sample loops. Cytiva Sample loops supplied with ferrules and unions. 

Used for superloop. Cytiva Borosilicate Glass Tube is 150mL.

Thermo Scientific™ Dionex Cytochrome C Digest is lyophilized.

The unique deactivation process of SGE inlet liners provides excellent analysis for a wide range of compounds

Introduce large sample volumes into a pressurised fluid LC system.  Cytiva Fluoro Plastics Fluoro Rubber Glass Superloop is used together with the injection valve MV-7, INV-907, V9-Inj, or V9H-Inj and replaces a simple sample loop.