Tetrahydrofuran, BAKER ANALYZED HPLC, J.T. Baker™

Product Code.	Quantity	Packaging	unitSize
10461003	2.5 L	Glass	2.5 L

Product Code. 10461003 Supplier JT Baker Supplier No. 9441.2500

Description

Get rapid, reproducible performance and separation results. Tetrahydrofuran, BAKER ANALYZED HPLC, J.T. Baker™ is an application-optimized, function-tested HPLC reagent/solvent that maximizes throughput and ease-of-use without sacrificing efficiency or reproducibility.

BAKER ANALYZED HPLC Reagents are high purity solvents, buffer salts, and mobile phase modifiers for use in analytical and preparative separations. They are optimized for research and quality control applications, including high performance liquid chromatography, gel permeation chromatography and UV-spectrophotometric analysis.

• Recalibration or adjustments due to lot changes are minimized for optimum performance from sensitive instrumentation
• Low backgrounds free of extraneous peaks
• Low UV absorbance in critical ranges - assured through UV absorbance testing at a variety of points and through gradient elution testing
• Fluorescence testing for trace impurities which would cause interference
• Function-tested for: assay, water, minimal residue after evaporation and UV absorbance and fluorescence in critical ranges
• Lot to lot consistency, with an actual Lot Analysis on the label
• Innovative packaging options to assure solvent quality to the point-of-use

Specifications

• Melting Point: -108.3°C
• Absorbance: Max. 1.0 at 230nm, Max. 0.15 at 260nm, Max. 0.08 at 270nm, Max. 0.02 at 310nm
• CAS: 109-99-9
• Color: Colorless
• Density: 0.889g/cm³
• Quantity: 2.5 L
• Explosion Limit: 1.8 - 11.8 Vol %
• Flash Point: −20°C
• Ignition Point: 321°C
• Packaging: Glass
• Physical Form: Liquid
• Residue after Evaporation: Max. 3 ppm
• Molecular Formula: C4H8O
• Linear Formula: OCH₂CH₂CH₂CH₂
• Vapor Pressure: 21.60 kPa
• MDL Number: MFCD00005356
• Water: Max. 0.02%
• Synonym: tetrahydrofuran, furan, tetrahydro, butylene oxide, furanidine, hydrofuran, tetramethylene oxide, oxacyclopentane, 1,4-epoxybutane, tetrahydrofuranne, tetraidrofurano
• Boiling Point: 65°C
• Solubility Information: Miscible in water
• InChI Key: WYURNTSHIVDZCO-UHFFFAOYSA-N
• SMILES: C1CCOC1
• IUPAC Name: oxolane
• Molecular Weight (g/mol): 72.11
• PubChem CID: 8028
• ChEBI: CHEBI:26911
• Formula Weight: 72.11g/mol
• Percent Purity: ≥99.8%
• Grade: For use in High Performance Liquid Chromatography
• Chemical Name or Material: Tetrahydrofuran

Safety and Handling

Signal Word

• Danger

Hazard Category

• Serious eye damage/eye irritation Category 2
• Flammable liquid Category 2
• Specific target organ toxicity Category 3

Hazard Statement

• H225-Highly flammable liquid and vapour.
• H319-Causes serious eye irritation.
• H335-May cause respiratory irritation.
• EUH019-May form explosive peroxides.

Precautionary Statement

• P210-Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P241-Use explosion-proof electrical/ventilating/lighting/ equipment.
• P303+P361+P353-IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/ shower.
• P305+P351+P338-IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P405-Store locked up.
• P501b-Dispose of contents/container in accordance with local/regional/national/international regulations.