Acetone, BAKER ANALYZED, J.T. Baker™

Product Code.	Quantity	Packaging	unitSize
15548454	2.5 L	HDPE	2.5 L

Product Code. 15548454 Supplier JT Baker Supplier No. 8002.2500PE

Description

Does not interfere with the measurement at the specific wavelength being measured. Acetone, BAKER ANALYZED, J.T. Baker™ exceeds ACS specifications and is recommended for use in ultraviolet spectrophotometry applications.

• Exceeds the requirements set forth by the American Chemical Society (ACS)
• Label provides an actual Lot Analysis as a guarantee of purity and consistency
• Analytical methods used for these determinations are based on standard test procedures described in technical publications
• Improvements developed by J.T. Baker are employed to achieve a higher degree of reliability

Specifications

• pH: 5 to 6 (at 20°C)
• Melting Point: -94.9°C
• Absorbance: Max. 1.00 at 330nm, Max. 0.10 at 340nm, Max. 0.02 at 350nm, Max. 0.01 at 400nm
• CAS: 67-64-1
• Color: Colorless
• Density: 0.79g/cm³ at 20°C
• Quantity: 2.5 L
• Explosion Limit: 2.6 - 13 Vol %
• Flash Point: −20°C
• Ignition Point: 465°C
• Odor: Pungent, floral
• Packaging: HDPE
• Physical Form: Liquid
• Residue after Evaporation: ≤5 ppm
• Titratable Acid: ≤0.0003meq/g
• Molecular Formula: C3H6O
• Titratable Base: ≤0.0006meq/g
• MDL Number: MFCD00008765
• Viscosity: 32 mPas at 25°C
• Water: ≤0.5%
• Synonym: acetone, 2-propanone, propanone, dimethyl ketone, methyl ketone, dimethylformaldehyde, pyroacetic ether, beta-ketopropane, dimethylketal, chevron acetone
• Boiling Point: 55.8°C to 56.6°C
• InChI Key: CSCPPACGZOOCGX-UHFFFAOYSA-N
• SMILES: CC(C)=O
• IUPAC Name: propan-2-one
• Molecular Weight (g/mol): 58.08
• PubChem CID: 180
• ChEBI: CHEBI:15347
• Formula Weight: 52.08g/mol
• Percent Purity: ≥99.5%
• Grade: Exceeds ACS specifications
• Chemical Name or Material: Acetone

Safety and Handling

Product Identifier

• Acetone

Signal Word

• Danger

Hazard Category

• Serious eye damage/eye irritation Category 2
• Flammable liquid Category 2
• Specific target organ toxicity Category 3

Hazard Statement

• H225-Highly flammable liquid and vapour.
• H319-Causes serious eye irritation.
• H336-May cause drowsiness or dizziness.
• EUH066-Repeated exposure may cause skin dryness or cracking.

Precautionary Statement

• P210-Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P233-Keep container tightly closed.
• P261-Avoid breathing dust/fume/gas/mist/vapours/spray.
• P280-Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340-IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P312-Call a POISON CENTER/doctor/if you feel unwell.
• P337+P313-If eye irritation persists: Get medical advice/attention.
• P403+P233-Store in a well-ventilated place. Keep container tightly closed.
• P501b-Dispose of contents/container in accordance with local/regional/national/international regulations.

Supplemental information

• MIXTURE LIST-Contain: acetone