Binder™ Gas Tank Connection Kit for N2

With a pressure regulator. Gas cylinder connection set - for N

Binder™ Reinforced Inner Chamber

Binder™ Reinforced Inner Chamber includes 2 reinforced racks. Inner chamber, reinforced - including 2 reinforced racks (max. total load 250 kg, max. load per rack

Binder™ Two Doors with Window and Interior Lighting

Provides visibility and illumination for climate chambers. Viewing window and interior lighting - 400 V option model, viewing window in each door, 470 x 290 mm

Fisherbrand™ Blocks for Fisherbrand™ Isotemp™ Digital Dry Baths/Block Heaters

A variety of blocks for any application Fisherbrand 28x 1.5ml block

Memmert™ Test Chamber with LED Display


Binder™ Qualifications Folder IQ/OQ

Supporting documents for validation performed by the customer. Qualification folder IQ/OQ - supporting documentsfor validation performed by customer

Binder™ Right Access Port

Binder™ Right Access Port is an accessory for use on the right of a variety of chambers and incubators. Access port with silicone plug - 50 mm, right

Binder™ Warranty Extension for KBWF 720 Growth Chambers

Extension of the warranty from 2 to 5 years. Extension of the warranty from 2 to 5 years

Techne™ Stainless Steel Mesh Shelves

Static stainless steel mesh shelves for use in Techne hybridizers, able to support up to 4kg in weight. Shelf mesh stainless steel HB1-D

Binder™ Reinforced Fan

To increase air change rates in Binder™ incubators and chambers. Fan, reinforced - to increase air exchange rate

Binder™ Access Port with Silicone Plug, 100mm

Available in four different positions - top, right, left and back. Access port with silicone plug - 100 mm, right

Binder™ Factory Calibration Certificate for Digital Pressure Display

Binder™ Factory Calibration Certificate for Digital Pressure Display is a measurement at 100 mbar or at specified pressure range. Calibration certificate, pressure - for digital pressure display, measurement at 100 mbar

OHAUS™ Module Block

OHAUS™ Module Block features close contact of tubes-to-walls allowing for maximum heat retention and is available with or without a thermometer well. Module Block12/13 mm 16 Holes

Binder™ Top Access Port

Binder™ Top Access Port is an accessory for use on the top of a variety of chambers and incubators. Access port with silicone plug - 125 mm, top

Binder™ Access Port with Silicone Plug with Lids, 30mm

Dual ports provided with silicone lids for closure. Access port with two silicone plugs - 30 mm, right

LMS™ Set of Castors for Series 4 Cooled Incubator

LMS™ Cooled Incubators come with a wide range of factory-fitted optional accessories and other extras to cater for individual requirements and even more operational flexibility. Castor LMS set for LMS series 4 incubators

Binder™ Data Logger Kit Temperature Calibration Service

For calibration of the temperature sensor including certificate. Calibration service BINDER Data Logger Calibration of temperature including certificate

Memmert™ Forced Convection Incubator with Twin Display and Touchscreen

Use these laboratory incubators for applications requiring temperatures up to +80°C, including critical incubations at +37°C. Memmert™ Forced Convection Incubators with Twin Display and Touchscreen eliminate key temperature overshoots and warm valuable loads carefully. INCUBATOR IF75plus TWINDISPLAY 74L 30-80°C

Thermo Scientific™ Accessories for Thermo Scientific™ Digital Heating Shaking Drybath

Optimize flexibility and performance SHAKE/HEAT BLOCK 1.5 ML

Fisherbrand™ Shelves for Fisherbrand™ Isotemp™ Microbiological Incubators and Ovens

Wire mesh or stainless-steel performated shelves SS shelf for Fisherbrand 117L Incubator (50145853)

Eppendorf™ Spare Inlet Filters for Galaxy™ Gas Analyzers for CO2 Incubators

Use these spare inlet filters with Galaxy™ Gas Analyzers for CO2 Incubators Spare Inlet Filter

Memmert™ Entry Port

Memmert™ Entry Port allows connections to be added to incubators. Entry port (silicone) 40 mm clear diameter, for introducing connections, moistur (FFO for ICO50)

Cell Locker™ Chamber

Protected chambers for your most sensitive cells Cell Locker SST

Thermo Scientific™ Shake 'n' Stack™ Hybridization Ovens

Conserve valuable space in your lab with these ovens, featuring a stackable, space-saving design with excellent uniformity ideal for molecular biology labs. Hybaid Shake'n'Stack oven NEW MODEL (includes 10bottle capacity rotisserie, adjustable feet, drip

Binder™ Calibration Certificate for Temperature

Binder™ Calibration Certificate for Temperature features a variety of measuring points at specified temperatures for a range of Binder™ incubators and chambers. Calibration certificate, temperature - temperature measurement incl. certificate and 27 measurings

Grant Instruments™ Incubator shaker

ES-80 Versatile and programmable bench-top orbital shaker-incubator for mixing and incubating biological cultures and samples in a variety of flasks and vessels. SHAKER-INCUBATOR

Eppendorf Galaxy™ 170 R CO2 Incubator

High-capacity incubator featuring excellent quality and performance and intuitive operation. Galaxy 170 R CO2 Incubator w/high-temperature disinfection, 1-19 % O2 control & 8split inner door

Thermo Scientific™ Options and Accessories for Thermo Scientific™ Heracell™ 150i and 240i CO2 Incubators

Support stands and shelves Additional stainless steel shelf, full-width, 2

IKA™ DB 7.1 Block


Memmert™ Reinforced Perforated Shelf