SGE syringe replacement plungers for gas tight syringes Plunger replacement for manual syringes PTFE

Improves laboratory workflow X3 Syringe SGE needle tip bevel, 23 gauge 500µL

Syringes are designed to delive reasy, reproducible injection of liquid samples into an injector on HPLC instrumentation. The CR-700 standardizes three major variables: sample volume, rate of injection, and depth of needle penetration. Even when operated by different technicians, the CR-700 provides reproducibility of +1% of the total syringe volume in routine procedures. CR700-200 10-200µL(22/51/3)

Syringes are designed to fit into, or with, various different instruments such as the MICROLAB™ 500 and MICROLAB 1000 1705 DX 50µL Syr

Can be used with removable (RN)-style syringes that are 100μL and smaller. X6 Needles Hamilton RN standard point style 3

Hamilton Company offers the most comprehensive selection of standard and custom syringes in the industry. Each is manufactured to achieve the highest level of accuracy and precision possible. 1705 RN 50uL SYR W/O NDL.borosilicate glass syringe/steel plunger/PTFE

Replacement needles for Valco VISF-1 injection valve syringes X6 RN Needle (22/19/3)L

1002 LTSN2.5mLSyr(**/**/**)Nadellänge: 11.2cm, Spitzenform: 1ST3

Improves the sensitivity of your MS analysis with reduced non specific sample interaction and increased analyte recovery. Autosampler syringe Shimadzu designed to improve

Borosilicate glass barrel and stainless steel needles provide strength and inertness. Backing provides quick and accurate volume assessment. Syringe SGE 10F-CTC-GT-5/0.72H fixed hole, side

Gastight version of the original 700 series syringes, ideal for dispensing volumes from 1 up to 500μL 1702 N 25µL Syr (22s/51/2)needle length 51mm

Kel-F hub (KF) needles can be used with Luer Tip (LT) and PTFE Luer Lock (TLL) syringes and connectors. Standard needle length is 2 in. (51mm). Custom lengths and point styles are available. X6 Needles Hamilton Kel-F Hubpoint style 3 Kel-F

Attached to the flange of the 700 series syringe is a blue Syringe Holder that provides a spot to hold the syringe that will not heat up the barrel causing dispense inaccuracies. Additionally it provides support to small volume plungers that are prone to bending during injection. This series of syringes is ideal for dispensing volumes from 0.5 µL up to 250 µL. 825 RN 250uL SYR W/O NEEDLE

Designed with virtually indestructible titanium nickel alloy plunger. SYRINGE,5µL,FIXED NEEDLE, SUPERFLEX,STANDARD

The 700 series syringe is the original hand-fitted Hamilton syringe. This series of syringes is ideal for dispensing volumes from 0.5 µL up to 500 µL. A variety of different terminations and needle options are available in this series. 702 RN 25µL Syr (22s/51/2)

Designed for use in PAL GC-xt, PAL COMBI-xt, PAL COMBI-xt extended and other autosampler systems 701 SN CTC (**/**)-203198-

Designed to enable the connection of a standard 1mL disposable pipette tip to the end of a Hamilton™ syringe. DISPOS. TIP ADAPTOR, 100ULTIP S (50-250ML)

Make procedures as painless as possible with extremely sharp and reliable stainless steel needles. Terumo™ Agani™ Single-use Sterile Hypodermic Needles feature a unique, latex-free double bevel design for maximum comfort. X100 Hypodermic needle Agani steril 19G 1,1X38mm,short 17°, color cream

Get accurate, reproducible results from these fixed-needle syringes for Thermo Scientific™ and Agilent GC autosamplers.

Features Diamond Syringe Technology which results in improved solvent resistance, wide temperature ranges, and increased operational smoothness. SGE PAL Autosampler Syringes with 50mm Fixed Cone Tip Needle are used for CTC, LEAP, CombiPAL, GC PAL, Thermo TriPlus, AS2000, AS3000, AS200/800 Autosamplers. Syringe SGE 10F-CTC-5/0.47C fixed needle, cone

Incorporate Diamond Syringe Technology offering significantly improved levels of durability, clarity and accuracy. SGE Autosampler Syringes with 42mm Cone Tip Fixed Needle are designed specifically for use on Agilent autosamplers. X6 SYRINGE,10µL,FIXED NEEDLE SUPERFLEX,FOR HP.0.47MM O.D. (PACK OF 6)

Reinforced plunger version of the 1700 series syringes is ideal for dispensing volumes from 1 μL up to 500 μL. 1805 RN 50µL Syr (22s/51/2)

Designed to work with 700/7000 series MICROLITER syringes and 1700 series GASTIGHT syringes GUIDE 702-750

Extended barrel guides plunger during injection. SGE™ Guided Plunger Syringes are suitable for industrial environments. SYRINGE,5µL,REMOVEABLE NEEDLE, WITH GUIDED PLUNGER

SGE NanoVolume syringes are designed to inject down to 50nL with high precision and accuracy NEEDLE,0.5BR-OC-CE-7.5

1801 RN 10uL SYR W/O NDL.

The 700 series syringe is the original hand-fitted Hamilton syringe. This series of syringes is ideal for dispensing volumes from 0.5 µL up to 500 µL. A variety of different terminations and needle options are available in this series. 701 N 10µL Syr (26s/51/5)

Thermo Scientific™ Replacement Plungers for Syringes are available for selected syringes from a variety of manufacturers. Ersatzstempel for 365H2321, 365H2381

Metal hub (nickel plated brass) needles can be used with TLL syringes and LT or TLL connectors. Needles are 304 stainless steel (sst.). Standard needle length is 2 in. (51mm). Custom needle lengths and point styles are available. X6 N NEEDLE (20/51/5)

For applications requiring extremely precise plunger movement or minute fluid manipulation 1750 TPLT Syringe, 500µL