Stands and Rings
Stands and Rings
Fisherbrand™ Ring With Bossehead
Manufactured from zinc alloy steel.
Fisherbrand™ Socket Headed Screws
To replace the thumbscrews on scaffolding connectors. Fisherbrand™ Socket Headed Screws are for use with rods or tubes of 13mm diameter.
R&L Enterprises™ Rexaloy Screen Support
To support flat objects such as boards, manometers, etc. up to 34mm thick in the vertical position. R&L Enterprises™ Rexaloy Screen Support is excellent for general laboratory use.
Fisherbrand™ Scaffolding Foot Adapter
Provides a stable base able to be extended at right angles to fit scaffolding feet. Fisherbrand™ Scaffolding Foot Adapters accept 3 x 13mm diameter rods or tubes at right angles - two perpendicular to the boss, the third in line with the boss.
Chroma Gesellschaft™ Closed Stand Rings with Bosshead
Provides for ease of connection on ring stands. Chroma Gesellschaft™ Closed Stand Rings with Bosshead are manufactured from steel.
RL Enterprises™ Adapter for Bosshead STE-500-010K R and L
For use with STE-500-101k bossheads.
R&L Enterprises™ A-Shaped Retort Stand Base
An excellent option for supporting retort stands in the laboratory. R&L Enterprises™ A-Shaped Retort Stand Bases are manufactured from cast iron with a chemically resistant blue acrylic paint.
Fisherbrand™ Two-Way Scaffolding Connectors
Used for fixing two rods or tubes at right angles. Fisherbrand™ Two-Way Scaffolding Connectors can be tightened by hand.
Fisherbrand™ Aluminum Scaffolding Tubes
Provides for sturdy scaffolding construction in the laboratory. Fisherbrand™ Aluminum Scaffolding Tubes are manufactured from a durable aluminum alloy.
Fisherbrand™ Cut Out Rubber Covered Rings
With cut out section to allow easy removal of equipment.
RL Enterprises™ Allen Key for Bosshead STE-500-010K R and L
An excellent option for tightenting bossheads around laboratory scaffolding and rods.
Fisherbrand™ Stirrer Bosshead
Designed to fit 18mm diameter vertical rods and 13mm horizontal support rods.
Fisherbrand™ Rectangular Retort Stand Bases
Excellent for help holding onto bench equipment and glassware. Fisherbrand™ Rectangular Retort Stand Bases are manufactured from blue acrylic finished steel.
Promotions are available
Fisherbrand™ Scaffolding Feet
Provides a stable base for laboratory scaffolding. Fisherbrand™ Scaffolding Feet come with holes for screwing the foot to the bench, floor or wall.
Fisherbrand™ Scaffolding Tubes with End Plugs
Provides for sturdy scaffolding construction in the laboratory. Fisherbrand™ Scaffolding Tubes with End Plugs are manufactured from durable stainless steel.
Fisherbrand™ Plane Swivel Scaffolding Connectors
Suitable for making triangular or square frames for supporting large flanged items such as heating mantles and funnels. Fisherbrand™ Plane Swivel Scaffolding Connectors are provided with a steel strap.
Fisherbrand™ Scaffolding Rods
Provides for sturdy scaffolding construction in the laboratory. Fisherbrand™ Scaffolding Rods are manufactured from a durable aluminum alloy.
Promotions are available
Fisherbrand™ Cut Out Rings
With cut out section to allow easy removal of equipment.
Masterflex™ Lattice connector hold angle 90 degrees for metal rods aluminium Masterflex
Connect rods and / or clamps to your frame or build a custom lab frame
Fisherbrand™ Two-Way Swivel Scaffolding Connectors
Used for fixing two rods or tubes at any angle to each other. Fisherbrand™ Two-Way Swivel Scaffolding Connectors can be tightened by hand.
R&L Enterprises™ Zinc Plated Stand Rods
An excellent option for the construction of retort stands in the laboratory. R&L Enterprises™ Zinc Plated Rods are manufactured from mild steel.
Fisherbrand™ Scaffolding Feet
Provides a stable base for laboratory scaffolding. Fisherbrand™ Scaffolding Feet come with holes for screwing the foot to the bench, floor or wall.
Promotions are available
Fisherbrand™ Retort Stand Base
Get optimum results using this acid resistant textured acrylic remote stand. Fisherbrand™ Retort Base Stands, are one of the most widely used instruments in experiments.